Manufacturer: RKI Instruments
Order / Quote
Unique EAGLE features include a catalytic sensor for LEL hydrocarbon detection at the push of a button, infrared sensors for % volume methane and carbon dioxide, and dual hydrophobic filters that increases its water resistant performance. The EAGLE has a strong internal pump with a low flow auto shut off and alarm, which can draw samples up to 125 feet even with the dual hydrophobic filters in place. This allows for quick response and recovery from distant sampling locations. With its ergonomic design and large glove friendly buttons, the EAGLE offers easy access to controls such as auto-calibration, alarm silence, demand zero, peak hold and a wide variety of other features. Each channel has two alarm levels plus TWA and STEL alarms for toxic channels. The two alarm levels are user adjustable and can be latching or self resetting. Rugged, reliable, easy to operate and maintain, the EAGLE is the solution for just about any portable gas monitoring situation. Datalogging optional (additional rental fees apply); shipped with padded carrying case with room for accessories and calibration gas (sold separately).
Key Features
- Simultaneous detection of up to 6 different gases
- Over 400 gas monitoring configurations
- Wide range of toxic gases
- PPM/LEL hydrocarbon detection
- Powerful long-life pump up to 125’ range with filters
- Low flow pump shut off and alarm
- Methane elimination switch for environmental use
- Security “Adjustment Lockout Switch”
- Up to 30 hours of continuous operation
- Alkaline or Ni-Cad capability
- IR Sensors available for CO2, % LEL CH4 or HC, % volume CH4 or HC
- Transformer testing version available
- Datalogging option
- Autocalibration/single gas calibration
- Dual hydrophobic filters (most versions)
- Ergonomic RFI / EMI / chemical / weather resistant enclosure
- Intrinsically safe design, CSA (C / US) & UL classified (most versions)
- Complies with EPA Method 21
Enclosure
- Weather resistant, chemical resistant, RF/EMI coated high impact polycarbonate polyester blend; can be set in rain or into 2.5 inches of water without damage; ergonomically balanced with rugged top mounted handle
Dimensions
- 10.5" long x 5.9" x 7" tall
Weight
- 5 lbs
Detection Principle
- Catalytic combustion, electrochemical cell, galvanic cell, and infrared
Sensor Life
- 2 years under normal conditions
Sampling Method
- Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH
Display
- 4 x 20 LCD readout with backlighting; viewed through window in case top; displays readings & status of all channels simultaneously
Alarms
- 2 alarms per channel plus TWA and STEL alarms; fully adjustable for levels, latching or self reset and silenceable
Alarm Method
- Buzzer 85dB at 30 cm
- Dual high intensity LED’s
- Blinking display
Controls
- 6 external push buttons for operation, demand zero, and autocalibration; buttons also access LEL/ppm, alarm silence, peak hold, TWA /STEL values, battery status and many other features
Continuous Operating Hours
- 30 hours minimum using alkaline batteries
- 18 hours using Ni-Cads
Power Source
- Size D batteries, 4 alkaline or Ni-Cad
- Charger has alkaline recognition to prevent battery damage if alkalines are charged
Operating Temperature & Humidity
- -10° C to 40° C (14° F to 104° F), 0 to 95% RH, non-condensing
Indication Accuracy
- Maximum variance +/- 5% of full scale
Response Time
- 30 seconds to 90% (for most gases)
Safety Design
- Intrinsically Safe, Class I, Division 1, Groups A, B, C and D. CSA / NRTL & UL Classified (most versions)
Standard Accesories
- Shoulder strap
- Alkaline batteries
- Hydrophobic probe
- 5 foot hose (for special toxic gas versions; shorter teflon hose used without probe)
| Gas | Measuring Range | Accuracy* Whichever is greater |
| Standard Confined Space Gases | ||
| Hydrocarbons(CH4, std) | 0 - 100% LEL | ± 5% of read-ing or ± 2% LEL (*) |
| 0 - 50,000 ppm | ± 50 ppm or ± 10% of reading (*) | |
| Oxygen (O2) | 0 - 40% Vol. | ± 0.5% O2 |
| Carbon Monoxide (CO) | 0 - 500 ppm | ± 5% of read-ing or ± 5 ppm CO (*) |
| Hydrogen Sulfide (H2S) | 0 - 100 ppm | ± 5% of read-ing or ± 2 ppm H2S (*) |
| Super Toxics and Other Gases | ||
| Ammonia (NH3) | 0 - 75 ppm | ± 10% of reading or ± 5% of full scale (*) |
| Arsine (AsH3) | 0 - 1 ppm0 - 200 ppb | |
| Chlorine (Cl2) | 0 - 3 ppm | |
| Chlorine Dioxide (ClO2) | 0 - 1 ppm | |
| Fluorine (F2) | 0 - 5 ppm | |
| Hydrogen Fluoride (HF) | 0 - 9 ppm | |
| Hydrogen Chloride (HCl) | 0 - 15 ppm | |
| Hydrogen Cyanide (HCN) | 0 - 30 ppm | |
| Hydrogen Selenide (H2Se) | 0 - 0.2 ppm | |
| Hydrogen Sulfide (H2S) | 0 - 1 ppm0 - 30 ppm | |
| Nitrogen Dioxide (NO2) | 0 - 15 ppm | |
| Ozone (O3) | 0 - 1 ppm | |
| Nitric Oxide (NO) | 0 - 100 ppm | |
| Phosphine (PH3) | 0 - 1 ppm | |
| Silane (SiPH4) | 0 - 15 ppm | |
| Sulfur Dioxide (SO2) | 0 - 6 ppm | |
| IR Sensors | ||
| Carbon Dioxide (CO2)(IR Sensor) | 0 - 5,000 ppm0 - 10,000 ppm0 - 5% Vol. 0 - 20% Vol. 0 - 60% Vol. | ± 5% of read-ing or ± 2% of full scale (*) |
| Methane (CH4)(IR Sensor) | 0 - 100% LEL 0 - 100% Vol. | |
| Isobutane (iC4H10)(IR Sensor) | 0 - 100% LEL 0 - 30% Vol. |
Specifications subject to change without notice
- Confined space entry
- Leak investigation
- Line purge testing
- VOC monitoring
- Transformer testing
- Landfill monitoring